|
SIE
tic rods allow a variety of applications in formwork
tie systems. They have a cut threading and are available
in 6 Mtrs. length or as per length required. SIE tie
rods have been developed for reinforced concrete and
tying applications, Offering an economical solution
where threaded joints or couplers are required.
Tie
rods arc threaded along their entire length, to allow
the bear to be cut to the Required length on site, as
necessary. Tie thread form is a cut right-hand thread
with a coarse pitch that is robust and which allows
easy assembly.
Knock—on
wing nuts with two wings, compatible with tie rods.
Wing Nuts are a typical component of the Tie bar system
and are suitable for both timber and steel from work,
when counter plates are used. Zinc plated for rust protection.
Available in our different designs with and without
flange, with one or two wings.
SIE
Counter Plate for typical tie bar application with wing
nuts and tie rods.
Reinforced design, made from steel. Counter Plates are
for use both with timber and steel framework.
Counter Plates are of square dimensions of 120x120mm,
an opening hole to pass through tie rods and additional
mailing holes for timber framework if required. Counter Plates are available with or without galvanizing.
| Code | Dimensions | Thickness | Packing |
| SIE
1204 | 120
X 120 mm. | 4
mm | 100
pieces | | SIE
1205 | 120X
120 mm. | 5
mm | 80
pieces | | SIE
1207 | 120X
120mm | 7
mm | 70
pieces | | SIE
1208 | 120X
120mm. | 8
mm | 70
pieces |
| SIE
12010 |
120X
120 mm. |
10mm |
60
pieces |
|
